First, the ISG centrifugal pump is a vertical structure. The motor cover and the pump cover are designed together. The appearance is compact and beautiful, and the area is small and the construction investment is low. If a protective cover is added, it can be used outdoors.
Second, the inlet and outlet of the ISG vertical centrifugal pump have the same diameter and are located on the same center line, which can be directly installed on Hiroshima like a valve, and the installation is extremely simple.
Third, the ingenious foot design facilitates the stable installation of the pump.
Fourth, the pump shaft is the extended shaft of the motor, which solves the serious vibration problem caused by the coupling transmission between the conventional centrifugal pump shaft and the motor shaft. The surface of the pump shaft is chrome-plated, which greatly prolongs the service life of the pump.
Fifth, the impeller of the ISG vertical centrifugal pump is directly installed on the extended shaft of the motor, the pump has no noise during operation, and the motor bearing adopts low-noise bearing, so as to ensure that the noise of the whole machine is very low during operation, which greatly improves the use environment.
Sixth, the shaft seal adopts a mechanical seal, which solves the serious leakage problem caused by the seasoning seal of the conventional centrifugal pump. The static ring and moving ring of the seal are made of silicon carbide, which enhances the service life of the seal and ensures a dry and tidy workplace. .
Seventh, there are vent holes on the pump cover, and there are drain holes and pressure gauge holes on the lower side of the pump body and the flanges on both sides, which can ensure the normal use and maintenance of the pump.
Eighth, the unique structure of the ISG vertical centrifugal pump does not require dismantling the piping system, as long as the pump cover nut can be removed for maintenance, the maintenance is extremely convenient.